Migrating from ESPurna to esphomeyaml

Devices already running ESPurna can be flashed directly to an esphomeyaml firmware binary Over-The-Air via the ESPurna Web UI without opening the enclosure.

Step 1: Compile the Standalone Binary

esphomeyaml sonoff_switch.yaml compile

Locate the compiled firmware.bin inside sonoff_switch/.pioenvs/sonoff_switch/firmware.bin.

Step 2: Upload via ESPurna Admin Panel

Open your device's ESPurna web interface, navigate to the Admin → Upgrade tab, select your compiled firmware.bin, and trigger the OTA flash. Within 30 seconds the node will reboot onto the esphomelib stack.