Status LED

The status_led hooks into all esphomelib components and can indicate the status of the device. Specifically, it will:

  • Blink slowly (about every second) when a warning is active. Warnings are active when for example reading a sensor value fails temporarily or the WiFi/MQTT connections are disrupted.
  • Blink quickly (multiple times per second) when an error is active. Errors indicate that esphomelib has found an error while setting up. In most cases, esphomelib will still try to recover from the error and continue with all other operations.
  • Stay off otherwise.
# Example configuration entry
status_led:
  pin: GPIO2

Configuration variables:

  • pin (Required, Pin Schema): The GPIO pin to operate the status LED on.
  • id (Optional, ID): Manually specify the ID used for code generation.

Note

If your LED is in an active-LOW mode (when it’s on if the output is enabled), use the inverted option of the Pin Schema:

status_led:
  pin:
    number: D0
    inverted: True