SHT3X-D Temperature+Humidity Sensor

The sht3xd sensor platform Temperature+Humidity sensor allows you to use your Sensiron SHT31-D (datasheet, Adafruit ) sensors with esphomelib. The I²C Bus is required to be set up in your configuration for this sensor to work.

../../../_images/temperature-humidity.png
# Example configuration entry
sensor:
  - platform: sht3xd
    temperature:
      name: "Living Room Temperature"
    humidity:
      name: "Living Room Humidity"
    address: 0x44
    update_interval: 15s

Configuration variables:

  • temperature (Required): The information for the temperature sensor.
    • name (Required, string): The name for the temperature sensor.
    • id (Optional, ID): Set the ID of this sensor for use in lambdas.
    • All other options from Sensor and MQTT Component.
  • humidity (Required): The information for the humidity sensor.
    • name (Required, string): The name for the humidity sensor.
    • id (Optional, ID): Set the ID of this sensor for use in lambdas.
    • All other options from Sensor and MQTT Component.
  • address (Optional, int): Manually specify the i^2c address of the sensor. Defaults to 0x44.
  • update_interval (Optional, Time): The interval to check the sensor. Defaults to 15s. See update_interval gotchas.