MS5611 Atmospheric Pressure Sensor

The ms5611 sensor platform allows you to use your MS5611 atmospheric pressure sensors (datasheet, hobbytronics) temperature and pressure sensors with esphomelib. The I²C is required to be set up in your configuration for this sensor to work.

../../../_images/ms5611-full.jpg

MS5611 Atmospheric Pressure Sensor

../../../_images/ms5611-ui.png
# Example configuration entry
sensor:
  - platform: ms5611
    temperature:
      name: "Outside Temperature"
    pressure:
      name: "Outside Pressure"
    address: 0x77
    update_interval: 15s

Configuration variables:

  • pressure (Required): The information for the pressure sensor.
    • name (Required, string): The name for the pressure sensor.
    • id (Optional, ID): Set the ID of this sensor for use in lambdas.
    • All other options from Sensor and MQTT Component.
  • temperature (Required): The information for the temperature. sensor
    • name (Required, string): The name for the temperature sensor.
    • id (Optional, ID): Set the ID of this sensor for use in lambdas.
    • All other options from Sensor and MQTT Component.
  • address (Optional, int): Manually specify the i^2c address of the sensor. Defaults to 0x77.
  • update_interval (Optional, Time): The interval to check the sensor. Defaults to 15s. See update_interval gotchas.