HDC1080 Temperature+Humidity Sensor

The HDC1080 Temperature+Humidity sensor allows you to use your HDC1080 (datasheet, adafruit) sensors with esphomelib. The I²C Bus is required to be set up in your configuration for this sensor to work.

../../../_images/hdc1080-full.jpg

HDC1080 Temperature & Humidity Sensor. Image by Adafruit.

../../../_images/temperature-humidity.png
# Example configuration entry
sensor:
  - platform: hdc1080
    temperature:
      name: "Living Room Temperature"
    humidity:
      name: "Living Room Pressure"
    update_interval: 15s

Configuration variables:

  • temperature (Required): The information for the temperature sensor.
    • name (Required, string): The name for the temperature sensor.
    • id (Optional, ID): Set the ID of this sensor for use in lambdas.
    • All other options from Sensor and MQTT Component.
  • humidity (Required): The information for the humidity sensor
    • name (Required, string): The name for the humidity sensor.
    • id (Optional, ID): Set the ID of this sensor for use in lambdas.
    • All other options from Sensor and MQTT Component.
  • update_interval (Optional, Time): The interval to check the sensor. Defaults to 15s. See update_interval gotchas.

Currently, the platform doesn’t support activating the built-in heater, as it seems to only be rarely of use. If you need it, please open an issue.